Welcome to the Pressure Toolbox mini wiki at Scratchpad!

You can use the box below to create new pages for this mini-wiki. Make sure you type [[Category:Pressure Toolbox]] on the page before you save it to make it part of the Pressure Toolbox wiki (preload can be enabled to automate this task, by clicking this link and saving that page. Afterwards, you may need to purge this page, if you still see this message).

The pressure toolbox is a pressure monitoring system, built in a commercially available metal toolbox (Did you expect more?). The pressure toolbox uses ethernet connectivity to a SCADA system for monitored pressure data collection.

Parts list:

Pressure transmitter
PLC supporting ethernet connection
Power supply
Power Cord
Ace Hardware rubber feet
Home Depot 3/4" round head bolt
Ethernet cable

Installation procedure:

Plug it in
Hook up the ethernet
Connect the tubing to the source water
Turn it on
Go look at the data
If your SCADA system is set up, it's working.

Ad blocker interference detected!

Wikia is a free-to-use site that makes money from advertising. We have a modified experience for viewers using ad blockers

Wikia is not accessible if you’ve made further modifications. Remove the custom ad blocker rule(s) and the page will load as expected.